Babyface Pro FS USB Audio Interface

The exciting Babyface Pro once again demonstrates RME’s absolute commitment to superior craftsmanship, not only in audio circuits and driver development, but also in mechanics.

77,400

Guaranteed Safe Checkout

Features & Compatibility

Created with the highest precision from a block of aluminum, this high-end yet portable interface incorporates newly designed analog and digital circuits. Its innovative energy saving technologies provide supreme fidelity with no compromises in level, noise or distortion

In the new Babyface Pro FS even more improvements were implemented:
+19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations.

Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity.

3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms.

Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB.

6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won’t get quicker…).

All the above improvements were achieved without raising the units power consumption.

K-slot for theft protection.

Computer Connectivity: USB 2.0
Form Factor: Desktop
Simultaneous I/O: 4 x 4 (analog), 8 x 8 (digital)
Number of Preamps: 2 x mic, 2 x instrument
Phantom Power: Yes
A/D Resolution: Up to 24-bit/192kHz
Effects: Reverb, Delay (via TotalMix FX software)
Analog Inputs: 2 x XLR (mic), 2 x 1/4″ (Hi-Z/line)
Analog Outputs: 2 x XLR (+4dBu/+19dBu)
Digital Inputs: 1 x Optical Toslink (ADAT, S/PDIF)
Digital Outputs: 1 x Optical Toslink (ADAT, S/PDIF)
Headphones: 1 x 1/4″, 1 x 1/8″
MIDI I/O: In/Out (via breakout cable)
USB: 1 x Type B
Software: RME TotalMix FX, Total Mix Remote (iOS, Mac, PC), Brainworx Plug-ins, Scuffham S-Gear Amp Collection
Compatibility: iOS, Mac, PC
OS Requirements – Mac: OS X 10.9 or later
OS Requirements – PC: Windows XP SP2, Windows 7 SP1 or later
Bus Powered: Yes
Power Supply: 12V DC power supply / USB bus powered
Height: 1.4″
Width: 4.25″
Depth: 7.1″
Weight: 1.5 lbs.

Additional information

Customer Reviews

Reviews

There are no reviews yet.

Be the first to review “Babyface Pro FS USB Audio Interface”

Your email address will not be published. Required fields are marked *