Shock mounted and with XLR outputs, the AT2035 is equipped with a switchable 80 Hz high-pass filter to remove unnecessary low-end noise. If you’re wanting to record big voices or big instruments (particularly brass and drums) the 10 dB pad helps prevent the condenser from overloading, meaning the AT2035 handles high sound pressure levels with ease.
With its high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. The AT2035 also comes equipped with a luxury, leatherette and cushioned protective pouch and a custom shock mount.
Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 20 – 20,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Dynamic Range 136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 3.8 mA typical
Weight 403g
Dimensions 170.0 mm (6.69″) long, 52.0 mm (2.05″) maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8458 shock mount for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch
Reviews
There are no reviews yet.