The SC205 features a 5 inch woofer, and is ideal for the home, or in music or post-production studios. The sound delivered is surprisingly big despite the relatively small footprint, which makes these a great pair of primary or secondary reference monitors. The SC205 also have convenient threaded screw inserts on the bottom and the back to allow mounting on a regular microphone or speaker stand, and a back plate for wall mounting.
The SC205, like all EVE Audio monitors, are built on proprietry technology to the highest standards. The results of critical listening tests, as well as technical analysis, have produced monitors that can truly deliver in the studio, as well as translate to all listening environments. Innovative features and design are common to the range, including glass fibre coated SilverCone woofers, Air Motion Tweeters, high-performance bass ports, intuitive DSP control, and speaker protection.
DSP is handled by a dedicated, and electrically shielded, microcontroller that use a Burr-Brown A/D converter to digitise the analogue input, which then directly feeds the PWM-amplifiers. This simplicity results in a great-sounding monitor that can be controlled by a simple front panel knob on the speaker, and to protect the set-up from accidental tweaking the DSP can be locked by way of side-mounted DIP switches.
Bass ports have been placed at the back of the monitor, and have been tuned to get the best possible punch from the low end at all volume levels. This coupled with the stiff honeycombed drivers deliver serious power but retain the crispness and tightness that is required. To protect the AMT ribbon tweeter a magnetically attached protection grille or “Grid” can be snapped into place and removed as and when desired.
All of this great innovation makes the Eve Audio SC205 2-Way 5″ Active Monitor the perfect choice for professional producers and engineers, combining high-quality design with practical features and complete sonic control.
3kHzrnDesk filter (-5dB – +3dB) – 180HzrnLow-shelve filter (-5dB – +3dB) – < 300HzrnLevel-fix dip switchrnFilter-fix dip switchrnXLR in (impedance) – (10k)rnRCA in (impedance) – (10k)rnStandby – Dimensions (WxHxD – mm) – 175 x 275 x 233
Dimensions (WxHxD – inches) – 6.89 x 10.83 x 9.17
Free-field frequency range (-3dB) – 53Hz – 21kHz
Tweeter – AMT RS1
Mid-Woofer – 130mm/5″
Cross-over frequency – 3000Hz
Maximum SPL @ 1m – 101dB
Amplifiers – 2
Amplifiers (short-term outp. power) – 50W
Protection limiter
Volume – -inf. – +6dB
High-shelve filter (-5dB – +3dB) – > 3kHz
Desk filter (-5dB – +3dB) – 180Hz
Low-shelve filter (-5dB – +3dB) – < 300Hz
Level-fix dip switch
Filter-fix dip switch
XLR in (impedance) – (10k)
RCA in (impedance) – (10k)
Standby – < 1W
Full output – 70VA
Backmounting thread inserts
Mic stand thread inserts
Weight kg/lb. – 5.0 / 11.0
Reviews
There are no reviews yet.